What to do for Probe 1 short circuit in Alto-Shaam 1200-SK Oven lower compartment?
If your Alto-Shaam oven displays a 'Probe 1 short circuit, lower compartment' error, it indicates a short circuit has been detected on the sensor wires. Check the sensor connection circuit in the lower compartment, the sensor compartment itself, and the control board.
What to do for Probe 1 open circuit in Alto-Shaam 1200-SK upper compartment?
If your Alto-Shaam oven displays a 'Probe 1 open circuit, upper compartment' error, it means an open circuit has been detected on the sensor wires. Inspect the sensor connection circuit in the upper compartment, the sensor compartment itself, and the control board.
What to do for Probe 1 short circuit in Alto-Shaam Oven upper compartment?
If your Alto-Shaam oven displays a 'Probe 1 short circuit, upper compartment' error, it means a short circuit has been detected on the sensor wires. Check the sensor connection circuit in the upper compartment, the sensor compartment itself, and the control board.
How to troubleshoot 'Check fans' error on Alto-Shaam 1200-SK?
If you're getting a 'Check fans' error on your Alto-Shaam Oven, it means there's insufficient internal cooling airflow. Here's what to check: 1. Cooling fan filters: Make sure they aren't dirty. 2. Cooling fans: Ensure they are operating correctly. 3. Installation clearance: Verify that the installation meets the required clearances.
How to resolve 'No such file on USB' error on Alto-Shaam 1200-SK Oven?
If the Alto-Shaam Oven displays a 'No such file on USB' error, it means the required file is missing from the USB drive. Load the correct file onto the USB.
How to fix error E-10 on Alto-Shaam 1200-SK Oven?
To resolve error E-10 on your Alto-Shaam oven, which indicates a short circuit detected on sensor wires, check the following, in order: 1. Sensor connection 2. Sensor 3. Control Board
Why is my Alto-Shaam Oven showing unit under temperature?
If the Alto-Shaam oven displays a unit under temperature message, this is due to the cavity sensor being under temperature for too long. In this case, you should troubleshoot the heating elements.
Why is my Alto-Shaam Oven showing unit over temperature?
If your Alto-Shaam oven is showing a unit over temperature error, it's because the cavity sensor has been over temperature for too long. This could be due to: 1. The cooling fan not operating. 2. Installation clearance requirements not being met.
What to do if Alto-Shaam 1200-SK Oven shows under-voltage error?
If your Alto-Shaam oven displays an under-voltage error, it indicates that the supply voltage is incorrect. Correct the supply voltage to fix the problem.
What to do if Alto-Shaam Oven shows over-voltage error?
If your Alto-Shaam oven displays an over-voltage error, it means the supply voltage is incorrect. You should correct the supply voltage to resolve this issue.
General| Brand | Alto-Shaam |
|---|---|
| Model | 1200-SK |
| Category | Oven |
| Language | English |
A checklist for ensuring the installation site meets all requirements before oven installation.
Details electrical, WiFi, and site conditions for installation readiness.
A checklist for the technician to complete during the installation process.
Guides on installing the oven, including requirements and specifications.
Outlines installation requirements and electrical voltage/phase/frequency specifications.
Detailed electrical specifications (V, Ph, Hz, AWG, A, Breaker, kW, Plug) for various oven models.
Critical warnings regarding electrical connections and grounding.
Guides on connecting the oven's electrical wiring.
Critical warnings about electrical safety, grounding, and rating tags for wiring.
Step-by-step guide for connecting the electrical wiring to the oven.
Details on connecting wires to circuit breakers and securing the cord grip.
Guides users on powering the oven on and off using the controls.
Guide to selecting and cooking food using pre-programmed recipes.
Steps for cooking and holding food by time in manual mode.
Guide to cooking food using probes in manual mode.
Steps for holding food using probes after cooking.
Guide to performing hot smoking using manual mode with specific steps.
Step-by-step guide for performing cold smoking.
Guides on creating custom recipes by setting parameters.
Steps to create a custom recipe by entering temperature, time, and other parameters.
Procedures for editing, copying, or removing existing custom recipes.
Step-by-step guide to transfer recipes from a USB drive to the oven.
Confirms the recipe loading process and how to remove the USB drive.
Instructions for saving recipes from the oven onto a USB drive.
Confirms the recipe saving process and how to remove the USB drive.
Guide to updating the oven's software using a USB drive.
Guides on how to modify various oven settings.
Guide to accessing and viewing the oven's system, serial, and software information.
Steps to download HACCP data from the oven to a USB drive.
Lists error codes, descriptions, causes, and remedies for Deluxe Control ovens.
Lists error codes, descriptions, causes, and remedies for Deluxe Control ovens.
Continues listing error codes, causes, and remedies for Deluxe Control ovens, including USB errors.
Lists remaining Deluxe Control error codes related to temperature, voltage, communication, and high limits.
Outlines the manufacturer's warranty coverage and periods for parts and labor.
Lists conditions and actions that void the warranty coverage.
Final warranty terms, limitations, and responsibility for water quality and maintenance.
To Next Page
