How to fix the 'Door open' error on my Alto-Shaam 1200-SK Oven?
If the Alto-Shaam oven displays a 'Door open' error, it means the door is not closed properly. Ensure the door is fully closed and check the door switch operation.
What to do if my Alto-Shaam 1200-SK Oven displays 'Check fans' error?
If the Alto-Shaam oven displays a 'Check fans' error, it indicates insufficient internal cooling airflow. The possible causes are: 1. Cooling fan filters dirty 2. Cooling fans not operating 3. Installation clearance requirements not met
What causes the 'Over-voltage' error on my Alto-Shaam 1200-SK, and how to fix it?
If your Alto-Shaam oven displays an 'Over-voltage' error, it means the supply voltage is incorrect. Correct the supply voltage to resolve this issue.
What does 'Under-voltage' mean on an Alto-Shaam oven?
If your Alto-Shaam oven displays an 'Under-voltage' error, it indicates that the supply voltage is incorrect. You should correct the supply voltage.
Why does my Alto-Shaam 1200-SK Oven say 'USB error (USB not present)'?
If your Alto-Shaam oven shows a 'USB error (USB not present)' message, it means that the USB is not detected. Try inserting the USB or using a different USB cable.
What does 'PCB over temperature' mean on my Alto-Shaam 1200-SK Oven?
If your Alto-Shaam oven displays a 'PCB over temperature' error, it means the PCB board temperature sensor is over 70° C. The possible causes are: 1. Cooling Fan not operating 2. Installation clearance requirements not met
What to do if my Alto-Shaam oven is under temperature?
If the Alto-Shaam oven displays a 'Unit under temperature' error, it indicates that the cavity sensor has registered an under temperature condition for too long. Troubleshoot the heating elements.
How to fix 'Bootloader EEPROM RAM reset' on Alto-Shaam 1200-SK Oven?
If your Alto-Shaam oven displays a 'Bootloader EEPROM RAM reset' error, it indicates a bootloader chip error. You need to power cycle the oven to reset it.
General| Brand | Alto-Shaam |
|---|---|
| Model | 1200-SK |
| Category | Oven |
| Language | English |
A checklist for ensuring the installation site meets all requirements before oven installation.
Details electrical, WiFi, and site conditions for installation readiness.
A checklist for the technician to complete during the installation process.
Guides on installing the oven, including requirements and specifications.
Outlines installation requirements and electrical voltage/phase/frequency specifications.
Detailed electrical specifications (V, Ph, Hz, AWG, A, Breaker, kW, Plug) for various oven models.
Critical warnings regarding electrical connections and grounding.
Guides on connecting the oven's electrical wiring.
Critical warnings about electrical safety, grounding, and rating tags for wiring.
Step-by-step guide for connecting the electrical wiring to the oven.
Details on connecting wires to circuit breakers and securing the cord grip.
Guides users on powering the oven on and off using the controls.
Guide to selecting and cooking food using pre-programmed recipes.
Steps for cooking and holding food by time in manual mode.
Guide to cooking food using probes in manual mode.
Steps for holding food using probes after cooking.
Guide to performing hot smoking using manual mode with specific steps.
Step-by-step guide for performing cold smoking.
Guides on creating custom recipes by setting parameters.
Steps to create a custom recipe by entering temperature, time, and other parameters.
Procedures for editing, copying, or removing existing custom recipes.
Step-by-step guide to transfer recipes from a USB drive to the oven.
Confirms the recipe loading process and how to remove the USB drive.
Instructions for saving recipes from the oven onto a USB drive.
Confirms the recipe saving process and how to remove the USB drive.
Guide to updating the oven's software using a USB drive.
Guides on how to modify various oven settings.
Guide to accessing and viewing the oven's system, serial, and software information.
Steps to download HACCP data from the oven to a USB drive.
Lists error codes, descriptions, causes, and remedies for Deluxe Control ovens.
Lists error codes, descriptions, causes, and remedies for Deluxe Control ovens.
Continues listing error codes, causes, and remedies for Deluxe Control ovens, including USB errors.
Lists remaining Deluxe Control error codes related to temperature, voltage, communication, and high limits.
Outlines the manufacturer's warranty coverage and periods for parts and labor.
Lists conditions and actions that void the warranty coverage.
Final warranty terms, limitations, and responsibility for water quality and maintenance.
To Next Page
