What does 'PCB shorted' mean on my Alto-Shaam 300-TH display?
If your Alto-Shaam oven displays a 'PCB shorted' error, it indicates that the PCB board temperature sensor is short-circuited, which means board failure.
What does error code 'UE02' mean on my Alto-Shaam oven?
If your Alto-Shaam oven displays a 'UE02' error, it means there is a missing file on the USB. Load the correct file onto the USB.
What does 'Cavity probe open' mean on my Alto-Shaam 300-TH display?
If your Alto-Shaam oven displays 'Cavity probe open', it means an open circuit has been detected on the sensor wires, halting any active program. Check: 1. Sensor connection 2. Sensor 3. Control Board
What does 'Cavity probe shorted' mean on my Alto-Shaam 300-TH?
If your Alto-Shaam oven displays 'Cavity probe shorted', it means a short circuit has been detected on the sensor wires, halting any active program. Check: 1. Sensor connection 2. Sensor 3. Control Board
Why is my Alto-Shaam 300-TH overheating?
If your Alto-Shaam oven is showing a 'Unit over temperature' error, it means the cavity sensor has registered an over temperature condition for too long. The possible causes are: 1. Cooling fan not operating 2. Installation clearance requirements not met
What causes 'Probe 1 open' error on Alto-Shaam 300-TH?
If the Alto-Shaam oven displays a 'Probe 1 open' error, it means an open circuit has been detected on the sensor wires. Check: 1. Sensor connection circuit, lower 2. Sensor compartment 3. Control Board
What does 'Probe 1 short' mean on Alto-Shaam 300-TH Oven?
If the Alto-Shaam oven displays a 'Probe 1 short' error, it signifies a short circuit detected on the sensor wires. Check: 1. Sensor connection circuit, upper 2. Sensor compartment 3. Control Board
What does 'Probe 1 open' mean on Alto-Shaam 300-TH Oven?
If the Alto-Shaam oven displays a 'Probe 1 open' error, it means an open circuit has been detected on the sensor wires. Check: 1. Sensor connection circuit, upper 2. Sensor compartment 3. Control Board
How to fix 'Bootloader EEPROM RAM reset' on Alto-Shaam 300-TH Oven?
If your Alto-Shaam oven displays a 'Bootloader EEPROM RAM reset' error, it indicates a bootloader chip error. You need to power cycle the oven to reset it.
What to do if my Alto-Shaam 300-TH is under temperature?
If the Alto-Shaam oven displays a 'Unit under temperature' error, it indicates that the cavity sensor has registered an under temperature condition for too long. Troubleshoot the heating elements.
General| Model | 300-TH |
|---|---|
| Category | Oven |
| Brand | Alto-Shaam |
| Power Source | Electric |
| Capacity | 3 full-size sheet pans |
| Control Type | Digital |
| Electrical | Single Phase |
To Next Page
