To Next PageTo Next PageWhat to do if Alto-Shaam Oven shows over-voltage error?
If your Alto-Shaam oven displays an over-voltage error, it means the supply voltage is incorrect. You should correct the supply voltage to resolve this issue.
What to do if Alto-Shaam 500-TH shows under-voltage error?
If your Alto-Shaam oven displays an under-voltage error, it indicates that the supply voltage is incorrect. Correct the supply voltage to fix the problem.
Why is my Alto-Shaam 500-TH Oven showing unit over temperature?
If your Alto-Shaam oven is showing a unit over temperature error, it's because the cavity sensor has been over temperature for too long. This could be due to: 1. The cooling fan not operating. 2. Installation clearance requirements not being met.
Why is my Alto-Shaam 500-TH Oven showing unit under temperature?
If the Alto-Shaam oven displays a unit under temperature message, this is due to the cavity sensor being under temperature for too long. In this case, you should troubleshoot the heating elements.
What causes PCB over temperature in Alto-Shaam Oven?
PCB over temperature in your Alto-Shaam oven means the PCB board temperature sensor is over 70° C. This can be caused by: 1. Cooling fan not operating. 2. Installation clearance requirements not met.
What does it mean when the Alto-Shaam 500-TH cavity probe is shorted?
If the cavity probe is shorted in your Alto-Shaam oven, it means a short circuit has been detected on the sensor wires, and this will halt any active program. The issue may be with the sensor connection, the sensor itself, or the control board.
What does it mean when the Alto-Shaam 500-TH cavity probe is open?
If the cavity probe is open in your Alto-Shaam oven, it indicates an open circuit has been detected on the sensor wires, which will stop any active program. Check the sensor connection, the sensor itself, and the control board.
What to do for Probe 1 short circuit in Alto-Shaam Oven upper compartment?
If your Alto-Shaam oven displays a 'Probe 1 short circuit, upper compartment' error, it means a short circuit has been detected on the sensor wires. Check the sensor connection circuit in the upper compartment, the sensor compartment itself, and the control board.
What to do for Probe 1 open circuit in Alto-Shaam 500-TH Oven upper compartment?
If your Alto-Shaam oven displays a 'Probe 1 open circuit, upper compartment' error, it means an open circuit has been detected on the sensor wires. Inspect the sensor connection circuit in the upper compartment, the sensor compartment itself, and the control board.
What to do for Probe 1 short circuit in Alto-Shaam 500-TH Oven lower compartment?
If your Alto-Shaam oven displays a 'Probe 1 short circuit, lower compartment' error, it indicates a short circuit has been detected on the sensor wires. Check the sensor connection circuit in the lower compartment, the sensor compartment itself, and the control board.
General| Model | 500-TH |
|---|---|
| Category | Oven |
| Brand | Alto-Shaam |
| Power Source | Electric |
| Control Type | Digital |
| Heat Source | Electric |
| Type | Holding Cabinet |
| Electrical | 208-240V |
| Shelves | 3 |
| Capacity (Pans) | 5 full-size pans |
| Power Supply | 208/240V |
| Cooking Modes | Holding |
| Warranty | 1 year |
Explains the meaning of DANGER, WARNING, CAUTION, NOTICE, and NOTE signal words used in the manual.
Outlines essential safety precautions for electrical, usage, and maintenance procedures to prevent injury.
Identifies the location of various warning and information labels on the appliance for user reference.
Provides detailed physical dimensions and diagrams for various oven models.
Lists essential checks and information required before commencing oven installation.
Step-by-step guide for installing the oven, including electrical and site requirements.
Identifies all controls on the oven interface and their specific functions.
Procedure for initial setup, cleaning, and preheating the oven before its first use.
Instructions for cooking food using time settings, with details on the optional smoking function.
Guide on using the food probe for precise temperature-controlled cooking and monitoring.
Steps for calibrating the oven's temperature probe to ensure accurate temperature readings.
Outlines daily, weekly, monthly, and yearly maintenance tasks for optimal oven performance and longevity.
Step-by-step instructions for safely and effectively cleaning the oven interior and exterior.
Lists common error codes, their potential causes, and recommended remedies for issue resolution.
Guidance on resetting the oven and resuming operation safely after a power outage.
Details specific conditions and circumstances that are not covered by the manufacturer's warranty.
