INSTALLATION
Si mple C o ntro l Cook & Ho l d ▪ O p er a to r’s Ma n ual ▪ MN -4 6 709 ▪ Rev 2 ▪ 3/ 2 1
37
How to Install the Drip Tray
Before you begin Remove the drip tray from the oven cavity and remove any packaging.
Procedure To install the drip tray, do the following.
Step Action
1. Align the holes in the drip tray with the two studs located on the front of the
oven.
2. Hang the drip tray on the studs and press downward to lock it into place.
Result The drip tray is installed.
WARNING: Slip Hazard
Failure to install the drip tray may result in moisture dripping on
the floor. Be sure the drip tray is installed before using.
NOTICE
Failure to install the drip tray could result in equipment
damage.
To Next Page
Loading...
