To Next PageTo Next PageWhat to do for Probe 1 open circuit in Alto-Shaam 500-TH lower compartment?
If your Alto-Shaam oven displays a 'Probe 1 open circuit, lower compartment' error, it means an open circuit has been detected on the sensor wires. You should inspect the sensor connection circuit in the lower compartment, the sensor compartment itself, and the control board.
What does bootloader error mean on Alto-Shaam 500-TH Oven?
A bootloader error on your Alto-Shaam oven indicates a bootloader chip error. To resolve this, a power cycle is required to reset the EEPROM RAM.
General| Model | 500-TH |
|---|---|
| Category | Oven |
| Brand | Alto-Shaam |
| Power Source | Electric |
| Control Type | Digital |
| Heat Source | Electric |
| Type | Holding Cabinet |
| Electrical | 208-240V |
| Shelves | 3 |
| Capacity (Pans) | 5 full-size pans |
| Power Supply | 208/240V |
| Cooking Modes | Holding |
| Warranty | 1 year |
Explains the meaning of DANGER, WARNING, CAUTION, NOTICE, and NOTE signal words used in the manual.
Outlines essential safety precautions for electrical, usage, and maintenance procedures to prevent injury.
Identifies the location of various warning and information labels on the appliance for user reference.
Provides detailed physical dimensions and diagrams for various oven models.
Lists essential checks and information required before commencing oven installation.
Step-by-step guide for installing the oven, including electrical and site requirements.
Identifies all controls on the oven interface and their specific functions.
Procedure for initial setup, cleaning, and preheating the oven before its first use.
Instructions for cooking food using time settings, with details on the optional smoking function.
Guide on using the food probe for precise temperature-controlled cooking and monitoring.
Steps for calibrating the oven's temperature probe to ensure accurate temperature readings.
Outlines daily, weekly, monthly, and yearly maintenance tasks for optimal oven performance and longevity.
Step-by-step instructions for safely and effectively cleaning the oven interior and exterior.
Lists common error codes, their potential causes, and recommended remedies for issue resolution.
Guidance on resetting the oven and resuming operation safely after a power outage.
Details specific conditions and circumstances that are not covered by the manufacturer's warranty.
