Alto-Shaam Vector VMC-F3E - Appliance Receiving Procedure

OPERATION
Ve ctor F® Se ries ▪ S ervice Ma nual ▪ M N- 46 89 5 ▪ R ev 1 ▪ 7/ 20
18
Continued from previous page
5. Touch the firmware file g. The oven loads the selected firmware.
The oven goes through the update process:
▪ The screen goes blank.
▪ The striped screen displays for a few seconds.
▪ The screen goes blank.
▪ The logo screen displays for a few seconds.
▪ The oven turns off.
6. Press the ON/OFF button to turn on the oven and complete the update
process.
Result The control board has now been updated.

NOTE: Do not remove the USB drive during the update
process.
Select CB File
1/1
VMC-TS-010610
g
Loading CB File
Loading LvioXXXX.hex
VMC-TS-010604