OPERATION
Ve ct or F ® Se ries ▪ S ervice Man ual ▪ MN -4 6 895 ▪ R ev 1 ▪ 7/ 20
21
Continued from previous page
5. Touch the configuration file g. The oven loads the selected firmware.
The oven goes through the update process:
▪ The screen goes blank.
▪ The striped screen displays for a few seconds.
▪ The screen goes blank.
▪ The logo screen displays for a few seconds.
▪ The oven turns off.
6. Press the ON/OFF button to turn on the oven and complete the update
process.
Result The configuration file has now been loaded.
NOTE: Do not remove the USB drive during the update
process.
Loading configuration file (.ai2)
Load Config
Select Config/Recipe File
1/1
fonts.ai2
as_icons.ai2
ui_dump.ai2
To Next Page
Loading...
