EasyManua.ls Logo

Alto-Shaam Vector VMC-F3E - Manual Cooking Mode

Alto-Shaam Vector VMC-F3E
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
Ve ctor F® Se ries S ervice Ma nual M N- 46 89 5 R ev 1 7/ 20
56
Continued from previous page
7. Re-install the cooling fan filters.
8. Clean the door glass with Windex® or equivalent glass cleaner.
9. Re-install the jet plates and cooking racks.
10. Spray the exterior of the oven with stainless steel polish. Wipe the exterior of
the oven with a non-abrasive scrub pad.
Result The oven is now clean.
NOTE: Make sure the jet plates are installed correctly.
The nozzles on the jet plates should be pointing towards
the food.
NOTICE
Use only non-caustic cleaners.
Do not spray directly into the fan openings on the
rear of the oven.
Do not use cleaners that contain sodium hydroxide
(lye) or phosphorus.

Table of Contents

Other manuals for Alto-Shaam Vector VMC-F3E

Related product manuals