Alto-Shaam Vector VMC-F3E - Page 86

TROUBLESHOOTING
Ve ctor F® Se ries ▪ S ervice Ma nual ▪ M N- 46 89 5 ▪ R ev 1 ▪ 7/ 20
86
Does the voltage
correspond to
the voltage
printed on the
serial number
tag?
Replace the SSR.
Replace the control
board.
Refer to topic The Chambers do not Heat -
Element Line Voltage
No
Replace the
heater element.
No
Measure the current draw of the heater
elements. Is the current draw correct?
Yes
The heater is working properly.