ASSEMBLY/DISASSEMBLY
Ve ct or F ® Se ries ▪ S ervice Man ual ▪ MN -4 6 895 ▪ R ev 1 ▪ 7/ 20
99
Continued from previous page
6. Remove the fan mount screws g.
7. Remove the motor assembly h from the oven.
Install the new motor assembly.
8. Re-install the fan mount screws g.
9. Tighten the motor mount adjustment screws.
Re-install the insulation around the motor. Tape all the seams in the
insulation.
10. Re-connect the motor wire connectors.
11. Re-install the back, sides, and top panels.
12. Connect electric power to the appliance and test all functions.
Result The blower motor assembly has been replaced.
To Next Page
Loading...
