MAINTENANCE
Ve ct or F ® Se ries ▪ O pera to r’s Man ual ▪ MN-468 94 ▪ Rev 1 ▪ 7/2 0
105
Continued from previous page
5. Spray the interior surfaces of the oven with Alto-Shaam non-caustic oven
cleaner, CE-46828. Let the cleaner work for 3–5 minutes. Scrub with a non-
abrasive scrub pad. Remove any residue with a water-soaked towel.
6. Remove the cooling fan filters f. Clean with a mild cleaner and rinse with
hot water.
7. Re-install the cooling fan filters.
8. Clean the door glass with Windex® or equivalent glass cleaner.
9. Re-install the jet plates and cooking racks.
10. Spray the exterior of the oven with stainless steel polish. Wipe the exterior of
the oven with a non-abrasive scrub pad.
Result The oven is now clean.
NOTE: Replace the cooling fan filters at least once a year.
NOTE: Make sure the jet plates are installed correctly.
The nozzles on the jet plates should be pointing towards
the food.
NOTICE
Use only non-caustic cleaners.
Do not spray directly into the fan openings on the
rear of the oven.
Do not use cleaners that contain sodium hydroxide
(lye) or phosphorus.
To Next Page
Loading...
