Alto AMX-100 User Manual

11
4.9 MAIN MIX LEVEL Dial
This specific dial sets the amount of signal sent
either to the main out socket or to the tape output.
12
4.12 PHANTOM LED
This LED indicates when the phantom power is
switched on.
15
4.13 TAPE Switches
Engaging this switch to route the 2 TRACK IN signal
into the control room output.
-. 2TK TO CTRL ROOM
Engaging this switch to route the 2 TRACK IN signal
into the main output.
-. 2TK TO MIX
16
17
14
15
16
17
18
19
20
21
MAX
-
8
2TK TO
CTRL ROOM
2TK TO MIX
TAPE
0
/
CTRL ROOM
PHONES
-+15
8
0
AUX SENDS
-+15
8
0
AUX RTN
-
8
2TK IN
MAX
0
+5
-20
PH
PWR
CLIP
R
L
OUTPUT LEVEL
+15
-
8
MAIN MIX LEVEL
4.14 2TK IN Control
This control is used to adjust the level of 2TK IN signal, which can be varied from - to MAX.
18
4.10 OUTPUT LEVEL LED Display
13
This stereo 4 segments LED meter will indicate the
level of the overall output signal.
4.11 POWER LED
14
This LED indicates when the power is on in your
AMX-100(FX).
4.16 AUX SENDS Control
This control is used to determine the master AUX SEND levels, which can be varied from - to +15dB.
20
12
13
4.15 AUX RTN (DFX) Control
19
This control is used to set the level of effects that received from the stereo AUX RETURN connectors or provided
by internal digital effects (for AMX-100FX model), which can be varied from - to +15dB. It can offer the further
gain for low level effects.

Alto AMX-100 Specifications

General

Brand	Alto
Model	AMX-100
Category	Music Mixer
Language	English