1. INTRODUCTION
Thank you for purchasing one of our MISTRAL stereo power amplifier.
The MISTRIAL 2500/4000/6000 are the line of high power, low profile, professional
power amplifiers with advanced features and great reliability. An automatic speed
fan matches cooling capacity with heat requirements. The amplifiers contains two
independent channels, with separate AC transformer secondaries, power supplies
and protections system. Each channel has independent protective circuitry against
open circuit, short circuit, mismatched loads and over temperature and LED
indicators for operating/protection, limit, power on and clip. The power outputs
employ standard power connectors and all the inputs are electronically balanced.
Enjoy your MISTRAL stereo power amplifier and make sure to read this Manual
carefully before operation.
2. FEATURES
Mountable in a 19" rack unit, stereo high power amplifier
Fantastic audio quality even with extremely high volume levels
Solid and durable can be mounted into a cabinet
User-controllable clip limiter
2 700 watt EIAJ on 4 ohms for MISTRAL 2500
2 1000 watt EIAJ on 4 ohms for MISTRAL 4000
2 1400 watt EIAJ on 4 ohms for MISTRAL 6000
Stereo (dual-channel) or bridge mono operating modes
Balanced XLR inputs/parallel outputs to ensure noiseless long wiring
Binding post and Neutrik Speakon connectors for output
Single channel, bridge and bi-amp output wiring possibility
Front panel LED indicators for operating/protection, limit, power on and clip
Accurate gain control
Independent DC and thermal overload protection on each channel automatically
protects amplifier and speakers
Over-heat protection for each channel
Manufactured under QS9000, VDA6.1 certified management system
1
To Next Page
Loading...
Need help?
General
