The aux send section is useful to control the overall level of the send to a monitor speaker or to an effects unit.
MUTE
This switch mutes the aux send signal when you don't need its sound. This feature
is important to reduce noise floor of effects units. This switch will be lit when it is
depressed (engaged).
Fader
This slider will give to the sound engineer the ability to manage the auxiliary send
level from - up to +10dB.
AFL
This switch allows the sound engineer to control the aux send signal. AFL is the
acronym of after-fade listen, the signal is post-fader. This large switch is illuminated
to give you an immediate visual control of which, and how many channels are in
solo.
24
[ Typhoon Master Section ]
AFLAFL
AUX1 AUX2
MUTEMUTE
10
5
5
10
20
30
40
50
60
-
0
8
To Next Page
Loading...
Need help?
General
