MAIN FEATURES
Pre-insert preamp CLIP LED
Extremely high headroom offering excellent dynamic range
Post-fader, post-EQ Direct output, can become pre-fader post-EQ by an internal jumper
Pre-fader, pre-eq channel insert
MIC input channels with golden plated XLRs and balanced LINE inputs
4-band sweep EQ on mono channels
4 Stereo input channels with left-right balanced TRS jacks, and mono MIC & line inputs
4-band fixed EQ on stereo channels
Ultra-low noise discrete Mic Preamps with +48V Phantom Power
100mm high precision faders
Each input channel features Mute & SOLO switches, Overload & signal present LEDs and low cut filters
(except stereo line inputs)
Fader CLIP LED
SUB 1-2, 3-4, 5-6, 7-8 & MAIN L-R signal assignment switch
8 AUX sends with pre-post-fader assign switches
Channel inserts and direct outputs on each mono channel for connection of outboard equipment
Groups, Aux sends and Main Mix inserts for flexible connection of outboard equipment
Control room/phones discrete level
Fully assignable Oscillator and Talkback sections
Three-frequency, three-level oscillator
2-TRACK IN path
Highly accurate 16 segment output level meters
5
XLR socket for lighting lamps
To Next Page
Loading...
Need help?
General
