TYPHOON - TECHNICAL SPECIFICATIONS
Electronics
Input
Input Impedance
Input Gain Line - Mono Channel
Input Gain Line - Stereo Channel
Maximum Input Level
Mic 2kohm Balanced
Line 10kohm Balanced
Continuously variable from 0dB to +60dB
Continuously variable from -25dB to +35dB
Continuously variable from -20dB to +20dB
Mic +22dBu
Line (Mono Channel) +22dBu
Line (Stereo Channel) +22dBu
100ohm Unbalanced
-10dBu / +22dBu
10kohm Unbalanced
-10dBu / +22dBu
> 60dB
Mic to Mix 20Hz - 20kHz +0/-1dB
Mic EIN ref. 150ohms - 127dBu (gain +60dB)
-90dBu (16 channels routed with faders down)
-86dBu (16 channels routed at 0dB, pan centre)
Mic to Insert (+30dB unity gain, +20dBu output) <0.009%
Mic to Mix (+30dB unity gain, +20dBu output) Typ 0.03%
> -80dB
> -80dB
> -80dB
> 100dB
Insert send impedance
Insert send level / Max.
Insert return impedance
Insert return level / Max.
CMR at 1kHz Line (20Hz - 20kHz)
Frequency response
Signal/Noise Ratio (20Hz - 20kHz)
Input Gain Mic
System Noise (20Hz - 20kHz)
Summing Noise
Line to Mix Noise
Distortion at 1kHz
Crosstalk at 1kHz channel to channel
Mix to Mix
Channel to Mix
Fader Attenuation
Output (Nominal Signal Level Mic -60dBu to 0dBu - Line 0dBu)
Output Impedance
Insert send impedance
Insert send level / Max.
Insert return impedance
Insert return level / Max.
Maximum Output Level Master Outputs on XLR
All other Outputs on XLR
All Outputs on 1/4 inch jacks
Headphones
All Line Outputs 100ohm Balanced
100ohm Unbalanced
+22dBu
10kohm Unbalanced
+22dBu
+22dBu
+22dBu
+22dBu
+22dBu/600ohm
Equaliser - Mono Channel
+15/-15dB 1.6 - 16kHz 1
+15/-15dB 0.8 - 8kHz 1
+15/-15dB 0.16 - 1.6kHz 1
+15/-15dB 40 - 400Hz 1
12 40 - 400Hz
- frequency range - bandwidth octave
- frequency range - bandwidth octave
- frequency range - bandwidth octave
- frequency range - bandwidth octave
slope dB/Oct. - frequency range
Treble - shelving
Hi Mid - peak/dip
Lo Mid - peak/dip
Bass - shelving
Hi Pass Filter
40
To Next Page
Loading...
Need help?
General
