Alto Typhoon - Page 45

44
Aux sends settings:
Aux is post fader, and its signal is addressed to fx unit 1, whom return is connected to stereo Aux Return 3
Aux is post fader, and its signal is addressed to fx unit 2, whom return is connected to stereo Aux Return 4
Aux are pre-fader, their signals are addressed to stage monitors AG
Aux return channels:
to be used for stereo tape recorder return
if you're recording your mix you have to mute this AUX RETURN, otherwise you risk a feedback
- to be used for stereo sources
to be used for FX unit 1 return
to be used for FX unit 2 return
1
2
3->8
AUX RETURN 1
Warning
AUX RETURN 2
AUX RETURN 3
AUX RETURN 4
LIVE VENUES 2 F
X & 6 stage monitors