Alto Typhoon - Page 47

46
STUDIO RECORDING - 2F
X & 6 headphones
Aux sends settings:
Aux is post fader, and its signal is addressed to fx unit 1, whom return is connected to stereo Aux Return 3
Aux is post fader, and its signal is addressed to fx unit 2, whom return is connected to stereo Aux Return 4
Aux are pre-fader, their signals are addressed headphone amplifier HPA6 (Aux sends A-F)
Aux return channels :
- to be used for stereo tape recorder return
if you're recording your mix you have to mute this AUX RETURN, otherwise you risk a feedback
- to be used for stereo sources
- to be used for FX unit 1 return
- to be used for FX unit 2 return
1-8 to 8 recorder inputs
1
2
3->8
AUX RETURN 1
Warning -
AUX RETURN 2
AUX RETURN 3
AUX RETURN 4
Groups assigns
LTO