[ CONNECTIONS ]
All connector shells should be of metal construction in order to provide a screen when connected to the console.
The Typhoon deserves to be operated with high quality twisted-pair audio cables to develop its full audio performances.
XLR plug & socket
Pin 1 - Screen/Ground
Pin 2 - Hot Signal
Pin 3 - Cold Signal
6,3mm. (1/4") Jack - BALANCED connections
TRS signal
Sleeve Screen/Ground
Ring Cold signal
Tip Hot signal
6,3mm. (1/4") Jack - unbalanced connections
TS signal
Sleeve Screen/Ground
Tip Signal
6,3mm. (1/4") TRS insert
Sleeve Screen/Ground
Ring Insert return
Tip Insert send
6,3mm. (1/4") TRS headphone
Sleeve Screen/Ground
Ring Right signal
Tip Left signal
Owner's manual conventions
Writing this owner's manual we used the following conventions:
1. The names of the keys switches and connectors used in this owner's manual match the labels on the unit
Examples: MIC IN -> Microphone input
MID-H -> Mid-High frequency boost/cut control
GR1-GR2 -> Group 1 & Group 2
2. The condition of the indicators on your mixer is surrounded by " ", e.g. or ."light" "flash"
7
To Next Page
Loading...
Need help?
General
