MA-660A
1. Special Precautions
1-3
Do not place a water container on the Equipment
If water spills, insulation will deteriorate, and this may cause electric leak and
fire.
Keep combustible matter away from the Equipment
Surface flash and expulsion can ignite combustible matter. If it is impossible
to remove all combustible matter, cover them with non-combustible material.
Do not cover the Equipment with a blanket, cloth, etc.
If such a cover is used, it may be overheated and burn.
Do not use this Equipment for purposes other than welding
Use of this Equipment in a manner other than specified can cause electric
shock and fire.
Use ear protectors
Loud noises can damage hearing.
Keep a fire extinguisher nearby
Keep a fire extinguisher in the welding shop in case of fire.
Maintain and inspect the Equipment periodically
Maintain and inspect the Equipment periodically, and repair any damage
nearby before starting operation.
To Next Page
Loading...
