CT-110D
2.Features
2-1
2. Features
The WELTOUCH CT-110D is a constant/alternating-current resistance weld control with a
15-schedule setting function. It is controlled by a microcomputer, allowing it to be applied to all
types of welding. Due to the plating-layer treatment by the pre-stage current, heat treatment by
the post-stage current, etc., splashing is prevented, the welding tip is protected from
overheating, and an ideal welding current can be set. In addition, the CT-110D can be
applied to all types of spot-welding machines by selecting the secondary-or primary-current
feedback constant-current control and source-voltage fluctuation compensation method. The
required items can be set very simply and easily. The CT-110D has a wide range of features,
as explained below.
1) Indicates the welding current, schedule set No., set time, etc. with an LED.
2) Stores up to 15 schedules according to the materials and thicknesses of the
workpieces to be welded.
3) Equipped with the 3-stage power-on system, and upslope and downslope
functions.
4) Supplies a stable welding current by the primary and secondary constant-current
control method and source-voltage fluctuation compensation method.
5) Has the welding mode applied to the high-tensile steel plate with a high initial
resistance
6) Includes functions for monitoring the current and conduction angle.
7) Comes with a cover to protect the touch panel from oil mist.
8) Has three counters to indicate the quantity of products, and other information.
To Next Page
