18
A condensing gas furnace achieves its high level
and routed to an appropriate drain location in compliance
with local and national codes.
concerning furnace drain trap installation and drain hose
hook ups.
•
used.
•
•
must meet local and nation codes.
•
toward the drain.
• Do not trap the drain line in any other location than at
the drain trap supplied with the furnace.
• If the drain line is routed through an area which may
within the drain line.
• If an air conditioning coil is installed with the furnace,
installed in the drain line, near the cooling coil, to
relieve positive air pressure from the coil’s plenum.
function of the furnace’s drain trap.
All furnace models come with a factory installed drain trap.
For vertical installations, the trap will remain in the factory
the drain to exit the right side. All furnace models installed
and installation position.
in compliance with code requirements. In horizontal or
1. Detailed instructions for the installation of the venting
system design or the venting system components;
and
2. A complete parts list for the venting system design or
venting system.
PROVIDED. When the manufacturer of a
Product Approved side wall horizontally
vented gas fueled equipment does not
manufacturer:
1.
installation instructions; and
2.
that system shall include a parts list and detailed
installation instructions.
e. A copy of all installation instructions for all
Product Approved side wall horizontally vented
gas fueled equipment, all venting instructions,
all parts lists for venting instructions, and/or all
venting design instructions shall remain with the
appliance or equipment at the completion of the
installation.
#
3
#1
#2
#4
#5
#
6
#7
#8
#9
#10
#11
100 Degree
Elbow
Coupling
To Next Page
Loading...
Need help?
General
