Amana AVPEC61D14 - Diagnostic Codes; Setting the Mode Display

26
SETTING THE MODE DISPLAY
<SCREENZERO>
Release Fault
Recall in between
5to 10sec
Release Fault
Recall in between
10 to 15 sec
Release Fault
Recall after 15 sec
Hold Fault Recall for
more than 10 sec
Solid Display
<SCREENZERO>
Hold Fault
Recall for more
than 2 sec
Release Fault
Recall between 2
to 5 sec
Hold Fault
Recall for more
than 5 sec
Flashing Display
First Error Code
Last Error Code
Press Fault Recall
for Error Code
Press Fault Recall
for Error Code
Press Fault Recall
to complete list
Release Fault
Recall in less
than 2 sec
Flashing Display
Solid Display “88” for
3 sec before erasing all
Diagnostic Codes
Second Error Code
0.2 sec ON – 0.2 sec OFF
0.5secON–0.25secOFF
Idle
for
3
mins.