Amazfit Bip S User Manual

Before starting a workout, the storage space on the watch will be checked. If not
enough space is left, any old workout data that have yet to be synchronized might
be overwritten. In order to ensure this does not happen, we recommend that you
connect with the app to synchronize workout data as soon as possible after the
workout.
The following workout modes require GPS positioning for track recording:
outdoor running, outdoor cycling, walking, and open water swimming. Before you
start an activity, please wait until GPS has full signal. The longer you wait， the
more it will grab and the better your signal will be.
Workout in Progress
The workout in progress page will be displayed after a 3s countdown.
Alerts during Workouts
Heart Rate Alert
During workouts, if your heart rate exceeds the set maximum, the watch will
vibrate to remind you that your heart rate is too high and show the current heart
rate. Before using this function, you need to enable heart rate alert in the workout
settings page.

Amazfit Bip S Specifications

General

Display type	Digital
Display diagonal	1.28 \
Watch glass type	Corning Gorilla Glass 3
Display resolution	176 x 176 pixels
Display technology	TFT
Shape	Rectangular
Band size	-
Band color	Blue
Band material	Thermoplastic polyurethane (TPU)
Watch case color	Orange
Market positioning	Smartwatch
Watch case material	Polycarbonate
Built-in microphone	No
Compatible memory cards	Not supported
Mobile operating systems supported	Android 5.0, Android 5.1, Android 6.0, Android 7.0, Android 7.1, Android 7.1.2, Android 8.0, Android 9.0, iOS 10.0, iOS 11.0, iOS 11.4, iOS 12, iOS 13
Heart rate sensor type	Optical
Bluetooth version	5.0
Charging time	2.5 h
Battery capacity	200 mAh
Battery life (max)	- h
Battery life (GPS mode)	22 h

Weight and Dimensions

Depth	42 mm
Width	35.3 mm
Weight	31 g
Thickness	11.4 mm
Band width	20 mm