Source selection Command
This command is for some audio and video devices (such as TV, projector and Audio Player), and this
command is used to change the input source. Also, in remote devices that do not have the ability to select
input directly, such as a TV with just one input switch, each time the mode is changed to one of the modes.
The keyword is
Source
and is used with {
source Mode
}, its form is as follows:
{place.pos.device} Source input to {source Mode}
Source of {place.pos.device} to {source Mode}
Example: (Alternatively, Laptop, AUX, FTP, Flash, USB Signal, Video, Radio, Audio-in, Computer, options)
Change the source of TV to video
Source of projector to computer
Audio Player source to radio
TV source video = TV source usb = TV source input = TV source
Menu, Confirm, Arrow Remote buttons command
This command is for devices such as TV Box and television and can call a channel number and run through
a remote.
The keyword is the
Menu
command and its form is as follows:
{place.pos.device} Menu
Menu {place.pos.device}
Example:
Saloon TV-Box menu
Menu of DVD Player
Display the menu of TV
Show projector menu = projector menu = menu projector
The keyword is the
Confirm
command and its form is as follows:
{place.pos.device} Confirm
Confirm {place.pos.device}
Example:
Confirm the DVD Player
Projector confirm it
TV confirm = confirm TV = confirm on the TV
To Next Page
Loading...
Need help?
General
