Air condition Mode Command
This command is for AC-compatible heating and cooling systems and is used to adjust the device's mood.
The keyword is
Mode
or
Mood,
and its form is as follows:
{place.pos.device} mode to {mode}
Mode of {place.pos.device} to {mode}
Example: (Alternatively, Mood, cooling, heating, auto options)
Set ac mode to cooling
Set ac mood to cooling
Saloon air condition mode to fan
Mood of air condition to auto
Mode of spilet to heating
Remote control special button Command
This command is used only for remote control, and if it is not intended for a specific device, it can simply
start the main and most used remote control, or run other buttons as the second, third, and ... fifth
buttons. In addition, the relevant remote codes must be imported by the technical specialists in the
sending device (and so-called "learn").
The keyword is the
Button
command and can be used with {
button No
}, its form is as follows:
{place.pos.device} {button No} button
{Button No} button of {place.pos.device}
Example:
Press parking remote button
Run button of my remote
Press second button of remote control
Parking remote first button = Parking remote button
Third button of toy remote
Start Command
This command is used to remotely control the controls and devices that have a concept in place for the
task to get started.
The keyword is the
Start
command and its form is as follows:
{place.pos.device} start
Start {place.pos.device}
Example:
Garden irrigation start
Music player start
Start the parking fan = parking fan start
Start my remote [it's like: my remote first button & my remote button]
To Next Page
Loading...
