Amazon Echo Dot - Connect AMAZON ECHO to WI-FI

Here’s how to connect AMAZON ECHO to WI
Please note that an AMAZON account is required.
To create one, please visit the website to create a free account with AMAZON using you email account.
Once you have an account, here are the steps;
• Visit this address
https://alexa.amazon.com/spa/index.html
•
Log in your Amazon account.
•
Once successfully logged in, Go to
• Click SETTINGS
and it will give you options (see right side on the image below)
• Select the option S
ET UP A NEW DEVICE
give you option of devices which you want to set up (ex. Echo dot; Echo, Echo Plus, etc….)
•
Select the device you want to set up. ( for example, Amazon Echo)
• Below screen will pop up (
image shown below).
• T
urn on the echo device and set it to the
(To turn on Wi-
Fi settings, press & hold the signified dot (.) for 5 seconds)
Orange rotating tape will appear
• Click the Connect to Wi-
Fi button on
Follow the steps shown above
to identify your Wi
disconnected
from the Internet and only will use the internal
according to the site's guide, until
the network is identified by the Echo
it right, the blue bar appears.
Alexa (virtual voice assistant)
will notify you regarding
greetings.
Going forth, the SSID of your Wi-
Fi
repeat the same
steps unless you want to set up a new
(Amazon Echo can register mu
ltiple network settings so
Here’s how to connect AMAZON ECHO to WI
Please note that an AMAZON account is required.
To create one, please visit the website to create a free account with AMAZON using you email account.
Once you have an account, here are the steps;
https://alexa.amazon.com/spa/index.html
Log in your Amazon account.
Once successfully logged in, Go to
SETTINGS
(see left panel on the image below)
and it will give you options (see right side on the image below)
ET UP A NEW DEVICE
tab
9 (see below image). Next screen will appear and it will
give you option of devices which you want to set up (ex. Echo dot; Echo, Echo Plus, etc….)
Select the device you want to set up. ( for example, Amazon Echo)
image shown below).
urn on the echo device and set it to the
Wi-Fi setting.
Fi settings, press & hold the signified dot (.) for 5 seconds)
Orange rotating tape will appear
.
Fi button on
the site.
to identify your Wi
-Fi network (
in this case, the system will be
from the Internet and only will use the internal
WI-FI
to introduce the ECO)
the network is identified by the Echo
just f
ollow the steps
will notify you regarding
the successful Wi-Fi
connection after the welcome
Fi
network and password are registered in Echo and
steps unless you want to set up a new
WI-FI network.
ltiple network settings so
it does not need to be reset
Here’s how to connect AMAZON ECHO to WI
-FI
To create one, please visit the website to create a free account with AMAZON using you email account.
(see left panel on the image below)
and it will give you options (see right side on the image below)
9 (see below image). Next screen will appear and it will
give you option of devices which you want to set up (ex. Echo dot; Echo, Echo Plus, etc….)
Fi settings, press & hold the signified dot (.) for 5 seconds)
in this case, the system will be
to introduce the ECO)
and
ollow the steps
. If you've done
connection after the welcome
network and password are registered in Echo and
you do not need to
it does not need to be reset
each time)