Amazone Citan Series User Manual

Operation
106
Citan BAG0014.4
09.14
10.1.2 Folding in machine
Warning!
Prior to folding the machine:
•
Fold the pre-emergence marker into transport position.
•
Fold the track markers into transport position.
Machine with AMATRON 3
1. Press shift key .
→ Symbol appears in the operating menu.
2. Actuate control valve yellow.
→ Fold the rear frame until an inclination of
approx. 80° (Fig. 111).
3. Actuate control valve green
→ Fold the wings (Fig. 112/1) until the slide
skids of the transport locking.
Fig.
110
Fig.
111
Fig.
112
Warning!
During the folding procedure o
b-
serve the possible collision of the
wings with the machine.
If necessary re
-adjust the inclina
tion
of the rear frame!
4. Actuate control valve yellow
→ The machine wings (Fig. 112/1) lower into
the transport locking
(Fig. 112/2).
Machine with AMALOG
+
1. Setting the hydraulic hand lever (Fig. 110)
1.1 Lever 1 in position A
1.2 Lever 2 in position B
2. Actuate control valve yellow
→ Fold the rear frame until an inclination of
approx. 80° (Fig. 111).
3. Actuate control valve green.
→ Fold the wings until the slide skids of the
transport locking.
Warning!
During the folding procedure ob-
serve the possible collision of the
wings with the machine.
If necessary re-adjust the inclina-
tion of the rear frame!

Amazone Citan Series Specifications

General

Brand	Amazone
Model	Citan Series
Category	Drill
Language	English