Coupling and uncoupling the machine
BAG0014.4 09.14
7 Coupling and uncoupling the machine
Only couple and transport the machine with a tractor which
has been designed for this task and fulfils the power re-
quirements.
When fitting the machine to the tractor three point linkage
the mounting categories on the tractor and the implement
must coincide.
When coupling tractor and implement, only use the pre-
scribed tools.
Standing of persons between the machine to be coupled
and the tractor is prohibited whilst the tractor is backing up.
Any assistants may only stay at the side of the vehicle and
help to direct it. Only when the vehicles have come to a full
standstill they are allowed to step between them.
When coupling and uncoupling implements, observe the
chapter " Safety advice for the operator ", Seite 25.
Always secure the machine with 4 chocks when it is uncoupled
from the tractor.
The lower link arms of the tractor should not have any lateral
play so that the machine always follows the tractor centrally and
does not swing to and fro.
To Next Page
Loading...
Need help?
General
