Amazone Pantera 4504 - 8 4 B W Ork Lights; 8 5 B G Eneral Settings

AmaDrive vehicle terminal
Pantera 4504 CP plus BAG0230.2 07.21
143
7.6.3 184BWork lights
Call up the work lights settings.
(1) Switch the work lights individually
(2) Switch the work lights together
Switch the boom work lights using the ISOBUS
control terminal.
The control panel illumination is switched
automatically.
The work lights can only be switched on when
the dipped beam is switched on.
The side-view floodlights are switched on via the
control lever for the indicators when in field
mode.
7.6.4 185BGeneral settings
Call up the Additional settings.
The Settings menu contains the following sub-
menus:
 Adjusting the terminal
 Adjusting the machine
 Diagnosis
7.6.4.1 250BAdjusting the terminal
Find the setting.
 Set the time in the status bar
 Set the date in the status bar
 Configure the display of the status bar, see
page 147
 Select day or night view
 Brightness
 Language
 Software and hardware information (only for
service personnel)
 Open Source licenses (only for service per-
sonnel)