EasyManua.ls Logo

Amazone Pantera 4504 - 11.3 Driving Procedures

Amazone Pantera 4504
286 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Driving with the Pantera
166
Pantera 4504 CP plus BAG0230.2 07.21
11.3 Driving with the machine
DANGER
Risk of accidents when driving on the road in field mode.
When driving on the road, select the road mode.
DANGER
Risk of an accident due to overtiredness and lack of concentra-
tion.
Make sure enough breaks are taken. Reduced times at the steering
wheel are necessary due to the influence of noise and vibrations.
When driving on slopes, switch on the AutoHold function to prevent
rolling back when moving off.
1. Start the engine.
After starting the engine:
2.
Release the parking brake.
3. Push rocker switch
in position + and keep pressed.
The ladder pivots to the transport position.
Observe the AmaDrive display.
4. Push rocker switch
downwards.
Select road mode for driving on roads and field mode for driving
on fields.
5. Adjust the track width.
When driving on public roads, the wheels are not allowed to
protrude over the outer dimensions of the machine.
6.
When driving on slopes, switch on the AutoHold
function.
7. Start to drive using the drive actuator
8. For braking, use the drive actuator or, where necessary, the
brake pedal at the same time.
CAUTION
Perform a track correction on a daily basis!
Otherwise there is a risk of causing an accident due to the track being
set incorrectly, see page 65.

Table of Contents