ambient SYSTEM ABT-CU-8LCD User Manual

Control Units ABT-CU-8LCD / ABT-CU-11LT / ABT-CU-11LCD
User Manual
22
4.3 Technical data of ABT-CU-11LT
Model ABT- CU-11LT
Power supply
48 V DC (operating range 40-57 V DC) connector
with screw terminals M2.5,
the distance between the partitions of 5.08mm
Power consumption Up to 100 W (depends on conguration)
Number of control slots 11
Number of function slots 0
Messages
Supported SD HC up to 32 GB / The set included 512 MB SLC
SDHC cards provide more than 20 min ofthemessages
LCD display none
DSP
Implemented 3 band parametric EQ on all 4 inputs of
thecontrol units / 8 band parametric EQ, audio limiter
anddelay line on all of the audio outputs
Number of audio inputs 4
Type of audio inputs Dierential
Connector type 1 × RJ45
Frequency response 40 Hz… 20 kHz (@1dB) / 400 Hz… 8 kHz (@0,1dB)
Input impedance ≥ 10 kΩ
Maximum input voltage ≥ 3 Vrms
Number of outputs 12
Type of outputs Balanced
Connector type 3 × RJ45
Frequency response 40 Hz… 20 kHz (@1dB) / 400 Hz… 8 kHz (@0,1dB)
Harmonic distortion
(THD + IMD)
≤ 0,05%
Headroom 10 dB
SNR ≥ 90 dB
Channel separation ≥ 80 dB
Output impedance 600 Ω
Nominal output level 1 Vrms

ambient SYSTEM ABT-CU-8LCD Specifications

General

Brand	ambient SYSTEM
Model	ABT-CU-8LCD
Category	Control Unit
Language	English