Version 1.2 ©Copyright 2019, Ambient LLC. All Rights Reserved. Page 8
2.2.1 Sensor Placement
1. Place the sensor in the pool or spa within 100 feet of the display console (Figure 10,
reference A). Avoid transmitting through solid earth or ground (Figure 10, reference B).
Use a tether (string) to fix the sensor in the pool or spa.
2. Place the console at least three feet away from computers, TVs and wireless phones.
3. Avoid transmitting through solid metal barriers.
Figure 10
NOTE: The F007PF is designed to float. If the F007PF is used under a cover and the sensor is
constantly submerged, the additional pressure will lead to premature gasket failure. Moisture will
enter the sensor compartment and cause sensor failure.
2.2.2 Maintenance
During each battery change (1-2 years), we recommend applying waterproof silicon grease to the
To Next Page
Loading...
Need help?
General
