To Next PageTo Next PageWhy do indoor and outdoor temperatures not agree on my Ambient Weather WS-23 Measuring Instruments?
Allow up to one hour for the sensors to stabilize due to signal filtering. The indoor and outdoor temperature sensors should agree within 2 °F (the sensor accuracy is ± 1 °F). You can also use the calibration feature to match the indoor and outdoor temperature to a known source.
What to do if indoor and outdoor humidity readings don't match on Ambient Weather WS-23?
Give the sensors about an hour to stabilize because of signal filtering. The indoor and outdoor humidity sensors should agree within 10% (the sensor accuracy is ± 5%). If needed, use the calibration feature to match the indoor and outdoor humidity to a known source.
How to prevent Ambient Weather WS-23 temperature sensor from reading too high?
To prevent inaccurate high temperature readings during the day, ensure the thermo-hygrometer is mounted in a shaded area on a north-facing wall. If this isn't possible, consider using a radiation shield.
Why is the display console contrast weak on my Ambient Weather WS-23?
A weak display console contrast can be resolved by replacing the console batteries with a fresh set.
What to do if Ambient Weather WS-23 Measuring Instruments show dashes on the display?
If sensor communication is lost and dashes appear on the screen, try the following: 1. Press and hold the CHANNEL/+ button for 3 seconds to reacquire the signal. The remote search icon will be constantly displayed. Once the signal is reacquired, the remote search icon will turn off, and the current values will be displayed. 2. Ensure the sensor is within the communication range (300’ line of sight, 100’ under most conditions). Adjust the distance between the sensor and the console; avoid distances less than 5 feet. 3. Verify the remote sensor's LCD is working and the transmitter light flashes every 60 seconds. 4. Install fresh batteries in the remote thermo-hygrometer, using lithium batteries in cold environments. 5. Avoid obstructions like solid metal or earth barriers. 6. Move the...
Lists all components included with the weather station for user reference.
Suggests essential tools for hanging the remote thermo-hygrometer transmitter.
Details the initial setup process for the remote thermo-hygrometer sensor unit.
Explains how to set the channel number for up to eight transmitters using dip switches.
Describes how to switch between Fahrenheit and Celsius display units using dip switch 4.
Illustrates the full segments of the LCD for description purposes only.
Details how to verify the accuracy and stabilization of indoor and outdoor sensor readings.
Explains how to view and clear the minimum and maximum temperature and humidity readings.
Describes how to set the minimum and maximum values to clear automatically every 24 hours.
How to switch between remote sensors or view them in a scrolling mode.
Instructions on how to toggle between Fahrenheit and Celsius temperature units.
Procedures to follow if the sensor communication is lost and how to reacquire the signal.
Guidelines for ensuring optimal wireless communication and avoiding interference.
Details how to operate the console's backlight using battery or AC power.
Instructions on how to fine-tune or correct sensor readings against a known source.
Defines accuracy as the ability of a measurement to match the actual value.
Defines a hygrometer as a device measuring relative humidity.
Defines range as the amount or extent a value can be measured.
Lists wireless transmission range, frequency, and update rate for the sensors.
Provides detailed specifications for measured parameters like temperature and humidity.
Details the power requirements for the base station and remote sensor, including battery life.
Lists all components included with the weather station for user reference.
Suggests essential tools for hanging the remote thermo-hygrometer transmitter.
Details the initial setup process for the remote thermo-hygrometer sensor unit.
Explains how to set the channel number for up to eight transmitters using dip switches.
Describes how to switch between Fahrenheit and Celsius display units using dip switch 4.
Illustrates the full segments of the LCD for description purposes only.
Details how to verify the accuracy and stabilization of indoor and outdoor sensor readings.
Explains how to view and clear the minimum and maximum temperature and humidity readings.
Describes how to set the minimum and maximum values to clear automatically every 24 hours.
How to switch between remote sensors or view them in a scrolling mode.
Instructions on how to toggle between Fahrenheit and Celsius temperature units.
Procedures to follow if the sensor communication is lost and how to reacquire the signal.
Guidelines for ensuring optimal wireless communication and avoiding interference.
Details how to operate the console's backlight using battery or AC power.
Instructions on how to fine-tune or correct sensor readings against a known source.
Defines accuracy as the ability of a measurement to match the actual value.
Defines a hygrometer as a device measuring relative humidity.
Defines range as the amount or extent a value can be measured.
Lists wireless transmission range, frequency, and update rate for the sensors.
Provides detailed specifications for measured parameters like temperature and humidity.
Details the power requirements for the base station and remote sensor, including battery life.
General| Type | Wireless Weather Station |
|---|---|
| Indoor Temperature Range | 32°F to 122°F (0°C to 50°C) |
| Humidity Range | 10% to 99% |
| Update Rate | 60 seconds |
| Display Type | LCD |
| Power (Base Station) | 3 x AA batteries (not included) |
| Power (Remote Sensor) | 2 x AA batteries (not included) |
| Temperature Resolution | 0.1°F/°C |
| Humidity Resolution | 1% |
| Transmission Frequency | 433 MHz |
| Wireless Range | 300 ft (100 m) |
| Wind Speed Range | 0 to 99 mph |
| Rainfall Range | 0 to 999.9 inches |
| Dimensions | 6.5 x 5.5 x 1.5 inches |
| Weight | Varies |
