To Next PageTo Next PageWhat to do if Ambient Weather Station wireless remote is not reporting to the console?
If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire the signal, reference 4.8.7. The maximum line of sight communication range is 300 feet and 100 feet under most conditions. Try moving the sensor assembly closer to the display console.
How to fix Ambient Weather Station sensor that reads too high in the daytime?
Ensure the thermo-hygrometer is in a shaded area, preferably a north-facing wall. If that's not possible, consider a radiation shield.
Why is my Ambient Weather Station display console contrast weak?
The console was not designed to run exclusively on batteries. Plug the Ambient Weather Station into AC power.
What to do if my Ambient Weather Station indoor and outdoor temperature do not agree?
Allow up to one hour for the sensors to stabilize due to signal filtering. The indoor and outdoor temperature sensors should agree within 3.6 °F (the sensor accuracy is ± 1.8 °F). You can also use the calibration feature to match the indoor and outdoor temperature to a known source.
What to do if my Ambient Weather Station indoor and outdoor humidity do not agree?
Give the sensors about an hour to stabilize due to signal filtering. The indoor and outdoor humidity sensors should agree within 10 % (the sensor accuracy is ± 5 %). You can also use the calibration feature to match the indoor and outdoor humidity to a known source.
General| Display Type | LCD |
|---|---|
| Rainfall Range | 0 to 393.7 inches (0 to 9999.9 mm) |
| Transmission Frequency | 915 MHz |
| Temperature Range (Outdoor) | -40°F to 140°F (-40 to 60 °C) |
| Humidity Range (Indoor/Outdoor) | 10% to 99% |
| Wind Speed Range | 0 to 180 km/h |
| Wind Direction | 0 to 360 degrees |
| Power (Base Station) | 5V DC adapter |
Details included components and their images.
Lists necessary tools for sensor installation.
Step-by-step guide to setting up the thermo-hygrometer sensor.
Core unit for receiving and displaying weather data.
Identifies elements and their positions on the console display.
Visual representation of the console's front and rear panels.
Instructions for powering and configuring the display console.
Explanation of the automatic time synchronization feature.
Procedure to confirm proper functioning of sensors.
Recommendations for optimal outdoor sensor location.
Tips to ensure stable wireless data transmission.
Guide to adjusting console settings like date, time, and units.
Lists various time zones and their corresponding cities.
Details on measuring and calibrating barometric pressure.
How to access and view past barometric pressure readings.
Procedure for calibrating pressure readings to a reference source.
Clarifies the distinction between absolute and relative pressure values.
Instructions for viewing the dew point measurement.
How to manage and cycle through multiple sensors.
Overview of alarm settings and management.
Method to check the currently set alarm time.
Steps to configure time-based alarms.
Procedures for silencing or snoozing active alarms.
Details on the specific low-temperature alert function.
Comprehensive guide for calibrating various sensor readings.
How to view and reset maximum and minimum recorded values.
Exploration of supplementary console functionalities.
How to adjust the screen's brightness level.
Explanation of the weather forecast icon system.
Detailed breakdown of forecast icons and their accuracy.
Display of moon phases based on hemisphere.
Interpretation of symbols indicating pressure trends.
Understanding the visual representation of pressure changes.
Steps to re-establish lost wireless sensor connection.
Procedure to revert the console to its original factory settings.
Technical details regarding wireless transmission capabilities.
Defines the accuracy, range, and resolution of measurements.
Information on battery requirements and power usage.
