Storing the radio stations to the presets
Whilst a radio station is playing, hold down and keep for a long time one of
the preset buttons (numbered 1 to 6 on remote control) until the screen shows.
After this radio stations will be stored in to the preset.
Assigned to
Preset #
Where # is the number of the button you held down.
Note: that some radio stations do not broadcast 24 hours per day, and some stations
are not always on-line.
Radio stations which not live broadcasting
Some radio stations can provide a number of options associated with their
station; for example, some stations enable you to listen to programmes that have
already been broadcast. When you select a radio station that has this facility, the
station does not start playing immediately, but instead the display shows:
<LIVE>
<On Demand>
Turn the knob to choose <Live> or <On Demand>, and then press the SELECT
button.
If you choose <Live> then the radio plays the current output from this station as
normal. If you choose <On Demand> then more screens are displayed where you
choose what you want to listen to. What is displayed will depend on the station you
have chosen.
When you choose <On Demand>, the display shows the names of the
programmes. Turn the rotating knob to choose the program you want, and then
press the SELECT button. When you have chosen the programme, either it will just
start playing, or the display show a list of days for you to choose from - use the knob
to set the day the programme was broadcast, after the SELECT button pressing.
After you have chosen the day, you may be able to choose the Start
Time. Set the Start Time using the knob and press the SELECT button.
To Next Page
Loading...