Programmes which enable you to choose the time also enable you to fast-
forward and rewind to the part you want while the radio is playing. When you press
the SKIP TO PREVIOUS TRACK or SKIP TO NEXT TRACK button, the elapsed time that
the programme has been playing is displayed. You can now turn the knob to change
this time. You can also use the SKIP TO PREVIOUS TRACK or SKIP TO NEXT TRACK
buttons to adjust the time. When you press the SELECT button again, the
programme will play from that point.
Once the Internet radio is playing a programme that allows you to choose its start
time, the radio’s preset buttons become playback-control buttons for the stream; e.g.
you can press PAUSE at any time to pause the stream, and then press PLAY to
resume playing. It is only possible to assign this type of stream to a preset numbered
1 – 6.
FM radio tuner
You can active FM tuner by pressing the Mode key on the remote. Pressing
the This button you can change music source between FM and Internet radios. Also
You can activating the FM tuner by selecting the ‘Tuner’ menu from the main radio’s
menu.
Whilst the radio is in FM tuner state, display shows FM frequency of the
currently station. Turning the rotary encoder clockwise will increase the FM
frequency and turning counter clockwise will decrease the frequency.
Press TUNE+/- button on front panel or remote control to auto search station.
To save FM radio station to the memory, press and keep for a long time one of
the preset buttons (numbered 1 to 6 on remote control) until the screen shows.
After this radio stations will be stored in to the preset.
Time data and alarm settings
Time and data settings
Press the SELECT button and turn the rotating knob until the display shows
settings menu.
< Settings >
Press the SELECT button and turn the knob until the find Set Time/Date menu.
< Set Time/Date >
To Next Page
Loading...