Media files locating and playing using UPnP server
Once the UPnP server is configured to share media files with the Internet
radio, you can play the files by doing the following on the radio.
• Keep pressing BACK to get to the radio’s top-level menu and then turn the
knob to select ‘Media Player’.
• Press SELECT and then turn the knob to section ‘UPNP Servers’.
• Press SELECT one more time and the radio will starts scanning for all available
UPnP servers. This may take a few seconds until scanning completes. If after
complete radio display shows ‘[Empty]’ this means that no UPnP servers are
found.
• After a successful scan, select your UPnP server, by rotating the knob if there is
more than one UPnP server, and then press SELECT.
The radio will now list the media categories available from the UPnP server,
e.g. ‘Music’, ‘Playlists’ etc. Turn the knob to select which category you wish to browse
and then press SELECT. After this turn the knob to a sub category and press SELECT
again. For example, you could select ‘Music’ and then ‘Album’.
Turn the knob to the media files that you wish to play and press SELECT. After
the radio displays ‘Add to Queue’, press SELECT button and add the tracks to radio
queue. After adding playing begin automatically.
Browsing the list of the queued track for playback
• Press the BROWSE button. The currently playing track name will be displayed.
• Turn the knob to see which tracks are queued up for playback.
• If you want to jump to a particular place in the queue then press the SELECT
button when the required track is displayed.
Queuing up UPnP tracks for later playback
• Move to the required track.
• Press the SELECT button. After this ‘Track Added To Queue’ will be displayed.
To Next Page
Loading...