Amcrest A2 - Page 42

42
3. Tap “P2P Connection”.
Note: IP/Domain/DDNS can be used to establish
a DDNS connection. For more information on
how to setup a DDNS connection, visit
amcrest.com/support
4. Scan the QR code. The QR code can be found
on the serial tag along with a scannable barcode.
5. Create a name for the device and enter a
username and password. The default username
and password will be admin. Tap “Start Live
View”.
6. Update the default password for the device
and tap “Start Live View” to view the device.