General
This screen displays general settings for the NVR. Below is an explanation of the fields on the General
settings screen:
Device Name: This field allows the user to customize the name of the NVR.
Device No: This field allows the user to customize the device’s number.
Language: The default language will be English.
Video Standard: The default video standard will be NTSC.
Sync to Remote Device: This option allows device settings, including language, format, and time zone, to
sync to a remotely connected device.
Logout Time: This field allows the user to define in minutes how long a camera can stay idle before it is
logged out.
Navigation Bar: This option allows the user to enable the navigation bar that shows on the main screen.
To refresh the interface, click the Refresh button. To confirm settings, click the Save button.
Date and Time
This screen displays date and time settings for the NVR. Below is an explanation of the fields on the Date
& Time settings screen:
System Time: This field allows the user to set the system time and time zone. Click Save to Save the
system time as it is shown in the display.
System Zone: This dropdown box allows the user to specify a time zone for the NVR to use.
Date Format: This dropdown box allows the user to specify a date and time format for the NVR to use.
There are 3 options.
YYYY MM DD: Year, Month, Day.
MM DD YYYY: Month, Day, Year.
DD MM YYYY: Day, Month, Year.
Date Separator: This dropdown box allows the user to specify a date separator. There are 3 options:
– Dash
/ Forward Slash
_ Underscore
Time Format: This dropdown box allows the user to specify a time format for the NVR to use. There are
two options.
24 Hour
12 Hour
DST: This option allows the user to activate DST for the system.
DST Type: This field allows the user to pick whether DST starts on a specific day of the week, or on a
specified.
Start Time: This field allows the user to enter a start date and time for DST to begin.
End Time: This field allows the user to enter an end date and time for DST to end on.
NTP: NTP stands for Network Time Protocol. This checkbox allows the user to enable the use of an NST
server to synchronize the date and time settings on the NVR.
To Next Page
Loading...
Need help?
General
