Server: This field allows the user to set the NTP server IP address. Clicking the Manual Update button
pulls a time update from the server.
Port: This field allows the user to set the NTP server port number.
Interval (Min.): This field allows the user to set the NTP synchronization interval. This number
determines how often the NVR queries the NTP server to get accurate date and time information. This
value can be between 0 and 60 minutes.
To refresh the interface, click the Refresh button. To confirm settings, click the Save button.
Holiday
This screen displays the holiday settings for the NVR. Holiday settings are used to allow the device to
recognized holidays in the system which are set by the user.
Below is an explanation of the fields on the Holiday settings screen:
No.: This number indicates how many holidays are in the system. Each line item has a number to signify
its place in the list.
Status: This dropdown box indicates the status of the holiday. There are two options:
Open: The holiday is active, and the NVR will stop recording for that holiday period.
Stop: The holiday is inactive, and the NVR will continue normal operation for that holiday period.
Name: This column is where the name of the holiday is displayed.
Date: This column shows the date that the holiday occurs on.
Duration: This column shows the range in which the holiday occurs.
Operation: This column allows the user to edit or delete the holiday.
Edit ( ): This column has a button that allows for the editing of the holiday.
Delete ( ): This column has a button that allows for the deletion of the holiday.
Add Holidays: This button allows the user to add a holiday.
Note: Holidays take precedence over the scheduled setup. Holidays do not roll over based on their
inherent date. Meaning, if a holiday is set for October 30th, then the system will treat every October
30th as a holiday.
Firewall
The Firewall menu allows the user to set IP filters which allow certain IP addresses to become whitelisted
or blacklisted in the system.
Below is a description of the fields in the security settings screen:
Type: This dropdown menu allows the user to select which type of firewall will be included. There are 3
types of firewall settings.
Network Access: Prevents a set IP address from network access.
Ping Prohibited: Prevents the device from pinging a set IP address.
Anti-Half Connection: Prevents the device from partial connection to a set IP address.
Enable: This option allows the user to enable the firewall feature.
To Next Page
Loading...
Need help?
General
