Amcrest A2 User Manual

60
People Counting
People Counting is typically used to provide a statistic based on the number of people who enter and exit
a certain area. Please note, this feature may differ depending on which model camera is being used on
the NVR. Not all AI cameras support this feature. For more information on using people counting please
refer to the information provided below.
1. Enable the People Counting icon in the Smart Plan menu. Click Save.
2. Click on the People Counting option located in the Parameters menu and ensure the Enable checkbox
is enabled. For more information on the people counting option for your specific camera, please visit
amcrest.com/support
Viewing People Counting Data
People counting data shows the number of people reported by the system entering or exiting the area
within a specified amount of time. This information is displayed graphically using a bar or line chart. For
more information on viewing people counting data, please refer to the information provided below.

Amcrest A2 Specifications

General

Brand	Amcrest
Model	A2
Category	DVR
Language	English