when a moving signal is detected in a specified area. Below is a screenshot of the motion detection
settings screen:
Below is a description of the fields on the Motion Detection settings page:
Channel: The channel dropdown menu is used to select which channel you would like to use to set your
motion detection.
Region: The setup button takes the user to the motion detection region setup screen for that specific
channel. On the next page is a screenshot of the motion detection region screen.
When the setup button is clicked, the current channel’s interface comes into a full screen view. The user
can then set up to 4 regions, each with their own region name, sensitivity (1-100), and threshold (1-100).
Each region has a specific color, and the region selector tool is displayed when the mouse is moved to the
top of the screen.
Sensitivity is the amount of change required to increase the motion detected by a percentage. The lower
the sensitivity, the more movement is required to trigger an alarm.
Threshold is the level that the motion detection needs to reach to trigger an alarm.
The lower the threshold, the more likely that motion will trigger an alarm.