Alarm Tone: Check this box to enable an imported voice prompt to be used if an event occurs. To use
this feature, select a file from the dropdown box in the File Name section.
More: Allows the user to access other motion detection options:
Show Message: This checkbox allows the user to enable the system to show an on-screen message
when a motion detection alarm is triggered.
Buzzer: Check this box to enable a buzzer to be sound on your device if an event occurs.
Log: Check this box to enable a log of the abnormality to be retained into the system.
Send Email: This checkbox allows the user to enable the system to send an email when a motion
detection alarm is triggered.
To reset to default settings, click the Default button. To copy the motion detection settings, click on the
Copy to button. To refresh the page, click the Refresh button. To Save the settings click the Save
button.
Video Tampering
The tampering settings screen is where the NVR can be setup to notify the user any time a camera is
tampered with or if the output video is only displaying in one color.
Below is a description of the fields on the Video Tampering settings page:
Channel: The channel dropdown menu is used to select which channel you would like to use to set your
motion detection.
Enable: This checkbox allows the user to enable the detection function for a specific channel. To select a
channel, click on the drop-down menu provided on the right.
Schedule: This setup button takes the user to the detection period settings screen. Below is a
screenshot of the motion detection period settings screen.
To Next Page
Loading...
