Alarm Tone: Check this box to enable an imported voice prompt to be used if an event occurs. To use this
feature, select a file from the dropdown box in the File Name section.
More: Allows the user to access other motion detection options:
Show Message: This checkbox allows the user to enable the system to show an on-screen message when
a motion detection alarm is triggered.
Buzzer: Check this box to enable a buzzer to be sound on your device if an event occurs.
Log: Check this box to enable a log of the abnormality to be retained into the system.
Send Email: This checkbox allows the user to enable the system to send an email when a motion detection
alarm is triggered.
To reset to default settings, click the Default button. To copy the motion detection settings, click on the
Copy to button. To refresh the page, click the Refresh button. To Save the settings click the Save button.
Audio Detection
Audio detection uses an “Audio In” interface (external or internal microphone) to trigger an alarm if audio
is detected. Please note, this option will only be applicable to cameras with built-in microphones or audio
capabilities. The feature is provided through the camera, not the NVR.
Below is a description of the features in this menu:
Channel: The channel dropdown menu is used to select which channel you would like to use to set your
motion detection.
Audio Exception Interprets if an audio input is abnormal, such as clipping audio, etc.
Intensity Change: Interprets if the intensity value surpasses the set threshold; it can record, send a
snapshot, and an alarm according to the result.
Sensitivity: Adjust and control the sensitivity of the audio from the camera.
Threshold: Adjust the threshold in which the audio will be detected by the camera.
Schedule This setup button takes the user to the motion detection period settings screen. Below is a
screenshot of the motion detection period settings screen.
Post Record: Allows the user to delay recording for a specified time after the event ends.
Record Channel: This checkbox allows the user to enable the system to record video for that channel
when a motion detection alarm is triggered. Delay is also associated with this tab; it is the This field
specifies in seconds how long the delay between alarm activation and recording should be.
Picture Storage: When an alarm occurs, the NVR triggers a snapshot for the selected channel.
Tour: Allows the user to enable the camera to activate a PTZ tour when a motion detection alarm is
triggered.
PTZ Linkage: Allows the user to active PTZ functionality to an applicable PTZ device.
Alarm Tone: Check this box to enable an imported voice prompt to be used if an event occurs. To use this
feature, select a file from the dropdown box in the File Name section.
More: Allows the user to access other motion detection options:
Show Message: This checkbox allows the user to enable the system to show an on-screen message when
a motion detection alarm is triggered.
Buzzer: Check this box to enable a buzzer to be sound on your device if an event occurs.
Log: Check this box to enable a log of the abnormality to be retained into the system.
To Next Page
Loading...
