Amcrest IPM-722S - Page 51

51
Below is an explanation of the fields on the Path settings tab:
• Event Type: This column designates storage options available to the camera. The options are FTP,
and NAS.
• Record Type: These columns designate which recording type should be recorded to which event
type. Check the box at the intersection of the record type and event type to designate where that
recording should be sent to.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To
save the settings, click the Save button.
5.4.4.2.2 FTP
This tab is where the user can change FTP settings. Below is a screenshot of the FTP tab:
Below is an explanation of the fields on the FTP settings tab:
• Enable: This checkbox allows the user to enable FTP uploading for the camera’s recorded media.
• Server Address: This field allows the user to designate a DDNS address for the FTP server.
• Port: This field allows the user to designate the port number for the FTP server.
• User Name: This field allows the user to input the username used to login to the FTP server.
• Password: This field allows the user to input the password used to login to the FTP server.