16
Viewing Text on a TV
A TV is designed primarily to show moving images. The large dot pitch of
a TV will yield poor quality static images. The small text sizes commonly
used for PC desktops can appear blurred or unclear on a TV. You can
compensate for this degradation by using larger fonts.
Using a TV as the Only Display
If you plan to move the computer to a place where you are using TV display
only, make sure that you have the TV display feature enabled prior to
disconnecting the monitor.
The maximum display resolution for TV is 1024×768. Choosing a
resolution higher than this will cause the TV display to disappear if it is the
only display device.
Using Games and Applications
Some older games and applications may instruct the graphics card to run
under a specific display mode. This may cause the TV display to turn off
automatically or become scrambled (the PC monitor or LCD display will
not be affected). The TV display will be restored once you exit the game or
if you restart the computer.
Connecting to a TV, VCR, or HDTV
You can connect the graphics card to a TV, HDTV, or VCR in several
ways, depending on the inputs the TV supports. To ensure the highest
quality graphics, choose the connection available that provides the best
signal.
Connections supported, in descending order of quality:
• HDMI™ (available on
PCI Express cards only)
• DVI (available on HDTV only)
• Component
• Composite
•S-Video
Note: If the TV has cable input only, connect the graphics card to the
TV through a VCR or an RF modulator, which is available from most
electronics stores.
Note: Copy-protected DVDs restrict playback to 480i and 480p
modes.
To Next Page
Loading...
Need help?
General
