EasyManua.ls Logo

AMD ATI Radeon HD 2600 Series User’s guide - User Manual

AMD ATI Radeon HD 2600 Series User’s guide
58 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ATI Radeon™ HD
2600 Series
User’s Guide

Table of Contents

Questions and Answers

  • J
    Joshua PopeAug 20, 2025
    Why is my AMD Video Card not booting up properly?
    • M
      Michael ThomasAug 20, 2025
      If your computer isn't booting up correctly with the AMD Video Card, ensure you've followed the installation instructions accurately. Verify the card is correctly installed and connected to the monitor. If issues persist during startup, try restarting the computer in Safe Mode. Also, check the operating system's system configuration utility for interrupt assignments. If your computer has on-board graphics, you might need to disable it on the motherboard.
  • J
    Jessica NguyenAug 22, 2025
    What to do if there is no display with my AMD ATI Radeon HD 2600 User’s guide Video Card?
    • B
      bwashingtonAug 22, 2025
      If you're experiencing a no display issue with your AMD Video Card, ensure the card is properly seated in its expansion slot and the monitor cable is securely fastened to the card. Also, confirm that both the monitor and computer are plugged in and receiving power. Check that you selected the correct monitor when installing the driver. If you're using an AGP graphics card, ensure you have the latest version of the AGP Motherboard/Chipset drivers.
  • M
    Mary FowlerAug 25, 2025
    What to do if the operating system warns that my AMD Video Card isn’t properly configured?
    • C
      Christopher EllisAug 25, 2025
      If the operating system warns that your AMD Video Card isn’t properly configured, try removing and reinstalling the drivers for the graphics card. Also, check the driver installation to ensure that all software is correctly loaded corresponding to the operating system and applications.
  • R
    riostaylorAug 26, 2025
    What to do if screen defects appear when using AMD Video Card?
    • C
      Carolyn SpearsAug 26, 2025
      If screen defects appear when using your AMD Video Card, check if the monitor supports the resolution, horizontal (kHz), and vertical (Hz) refresh rates required by the graphics card. Verify the current resolution, refresh rate, and color depth settings in the Display Properties. Ensure that both the video card and monitor support the selected resolution and refresh rates. Refer to the monitor documentation for recommended settings.
  • A
    amber18Aug 28, 2025
    How to fix off-center screen image, odd colors or no picture on AMD ATI Radeon HD 2600 User’s guide?
    • T
      Tracey CarrollAug 28, 2025
      To correct an off-center screen image, odd colors, or no picture on your AMD Video Card: * Try adjusting the brightness, sharpness, contrast, and color balance controls on your monitor. * Adjust the centering and positioning controls to properly position the picture. * Set the monitor RGB inputs (and sync switches, if available) to 75 ohms, with the sync set to external. * LCD monitor users should refer to the monitor documentation for the correct cable and connector to use with the DVI-I connector on the graphics card.
  • R
    Randy HeathAug 30, 2025
    Why is CrossFire™ not functioning on my AMD ATI Radeon HD 2600 User’s guide Video Card?
    • T
      Thomas MendozaAug 30, 2025
      For CrossFire™ to function correctly on your AMD Video Card, the CrossFire™ bridge interconnects must be properly connected to the CrossFire™ graphics cards. Follow these steps: 1. Connect one end of the CrossFire™ bridge interconnect to the internal VMO connection on one of the cards. 2. Connect the other end of the CrossFire™ bridge interconnect to the corresponding internal VMO connection of the other card. 3. Repeat Steps 1 and 2 to connect the second CrossFire™ bridge interconnect. 4. Connect the DVI-I connection on the primary CrossFire™ graphics card to your monitor.
  • R
    ricky33Sep 1, 2025
    What to do if my AMD ATI Radeon HD 2600 User’s guide says “Before CrossFire™ can be enabled, you need to close the 3D application or video playback that is currently running.”?
    • J
      Jeremy ColeSep 1, 2025
      You may see the message “Before CrossFire™ can be enabled, you need to close the 3D application or video playback that is currently running” on your AMD Video Card because you cannot enable CrossFire™ in the ATI Catalyst™ Control Center if a 3D application, game, or video playback, such as a DVD movie, is running. Close all open 3D applications, games, and movie player applications, and then enable CrossFire™.
  • A
    Arthur FosterSep 2, 2025
    Why is the CrossFire™ Aspect in ATI Catalyst™ Control Center not displayed for my AMD ATI Radeon HD 2600 User’s guide Video Card?
    • P
      Patrick PattersonSep 3, 2025
      The CrossFire™ aspect may not be displayed in the ATI Catalyst™ Control Center for your AMD Video Card if the CrossFire™ bridge interconnects have not been correctly attached. The CrossFire™ aspect is only available when the two ATI Radeon™ HD 2600 Series graphics cards have been correctly installed and connected together.
  • J
    Jeffrey IbarraSep 5, 2025
    What to do if my AMD ATI Radeon HD 2600 User’s guide says “CrossFire™ Is Currently Unavailable.”?
    • S
      Shannon JamesSep 5, 2025
      If you see the error message “CrossFire™ Is Currently Unavailable” with your AMD Video Card, this indicates that CrossFire™ did not correctly detect your graphics hardware or there is a software problem. Make sure the graphics cards and interconnects are installed correctly, all running 3D applications are closed, and then restart the ATI Catalyst™ Control Center. For software installation information, refer to the Getting Started Guide that came with your graphics card.
  • W
    williamsjenniferSep 7, 2025
    Why is the screen rotation function unavailable on my AMD Video Card?
    • D
      davidfrancoSep 7, 2025
      Screen rotation is not an available feature on CrossFire™ systems.

Summary

Introduction

System Requirements

Overview of the necessary hardware and software for the graphics card.

Installing the Graphics Card

Before You Begin

Preparatory steps before installing the graphics card, including driver uninstallation.

Record the Serial and Part Numbers

Instructions for finding and recording the serial and part numbers of the graphics card.

Uninstall Old Graphics Drivers

Steps to remove existing graphics drivers for successful installation.

Install the Graphics Card

Detailed instructions for physically installing the graphics card into the computer.

Installing and Configuring Displays

Connections

Illustrates and explains the various display connectors on the graphics card.

Adapters

Details the adapters used to connect the graphics card to different display devices.

Supported Display Connections

Lists the display configurations supported by the graphics card.

Connecting and Configuring Displays

General steps for connecting and configuring display devices after installation.

Connect to HDMI HDTV

Step-by-step guide for connecting an HDMI-compatible HDTV.

Connect to HDTV (DVI-to-DVI)

Instructions for connecting an HDTV using a DVI-to-DVI cable.

Connect to HDTV;Component Video (DVI-to-Component)

Guide for connecting HDTVs or component video devices via DVI.

Connect to HDTV;Component Video (S-Video-to-Component)

Instructions for connecting HDTVs using S-Video to component video.

Connect to Composite Video Device

Steps for connecting composite video devices like TVs or VCRs.

Connect to European Video Device (S-Video to SCART)

Guide for connecting European video devices using SCART adapters.

Installing Software and Drivers

ATI Catalyst Control Center

Help

Information on accessing help and support within the ATI Catalyst Control Center.

Using TV Display

Viewing the PC Display on TV or HDTV

How to display your PC's output on a TV or HDTV.

CrossFire

Basic Requirements

Lists the essential hardware and components for a CrossFire™ system.

Installing CrossFire Graphics Cards

Detailed steps for installing multiple graphics cards for CrossFire™.

Enabling CrossFire

Instructions on activating and configuring the CrossFire™ feature in software.

Setting the Windows Volume Control

Reference

Troubleshooting

Tips and solutions for common problems encountered with the graphics card.

Determine the System Card Bus Type

Guide to identify whether the system uses AGP or PCIe™ bus types.

Update AGP Motherboard;Chipset Drivers

Steps to update motherboard and chipset drivers for AGP compatibility.

Reinstalling Drivers

Procedures for reinstalling graphics drivers to resolve conflicts.

Product Registration

Additional Accessories

Compliance Information

FCC Compliance Information

Details compliance with Federal Communications Commission (FCC) rules.

Industry Canada Compliance Statement

Information regarding compliance with Industry Canada standards.

CE Compliance Information

Compliance details related to European directives (CE marking).

Electrical Safety

Safety information regarding electrical standards and temperature limits.

AMD ATI Radeon HD 2600 Series User’s guide Specifications

General IconGeneral
GPURV630
Memory Bus128-bit
Shader Model4.0
Max Resolution2560x1600 (Dual-Link DVI)
CrossFire SupportYes
HDCP SupportYes
Memory Size256 MB, 512 MB
Memory TypeGDDR3, GDDR4
InterfacePCIe x16
DirectX Support10
OutputsVGA, DVI, HDMI
TDP45 W

Related product manuals