To Next Page

To Previous Page

the Setup utility is not on a CD-ROM (because it was downloaded from the

Internet, for example):

a. In the Windows task bar, click Start.

The Start Menu opens.

b. Click Run.

The Run dialog appears.

c. Select Browse and select atisetup.exe from the root directory of the AMD

Installation CD-ROM or the folder in which you have placed the driver.

atisetup.exe appears in the Open field of the Run dialog.

d. Click OK.

3. In the Software Install dialog, click Install.

4. Click Next.

5. Click Yes to accept the license agreement.

The installation wizard will start.

6. Follow the wizard's on-screen instructions to complete the installation:

➭ Select Express to install typical drivers and software.

➭ Select Custom to choose individual software components for installation.

Note: The Custom installation option is recommended for advanced users only.

7. When the setup complete message appears, select Yes, I want to restart my

computer now and click Finish.

8. After the system reboots, the Found New Hardware dialog may display the

Digital Signature Not Found message. Click Yes or Continue to complete the

driver installation.

Proceed to configure your video settings and connect additional monitors, if

necessary.

3.3 Installing AMD Drivers and Software in Windows

Vista or Windows 7

In order to install the drivers and software necessary for your AMD FirePro V3900 to

function properly, the following must be true:

•

Your AMD FirePro V3900 must be physically installed in your computer.

•

Your operating system must be installed and operational.

•

You must log in as a user with administrator rights.

1. Turn on your monitor and then turn on your computer. Wait for your operating

system to boot up. You may receive a warning that the graphics driver failed to

install. Close this dialog.

10 Software Installation

AMD FirePro V3900 User Manual

Questions and Answers: